ASX16 - Air Conditioners UP TO 16 SEER
Standard Features
ASPT - Air Handlers and Coils
Product Features
Standard Features
- High-efficiency Copeland® scroll compressor
- High-density foam compressor sound blanket
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
- • Single-speed ECM condenser fan motor
- Copeland CoreSense diagnostics
- Fully charged for 15’ of tubing length
- Sweat connection service valves with easy access to gauge ports
- Field-installed bi-flow filter drier
- Copper tube & enhanced aluminum fin coil
- AHRI Certified; ETL Listed
- Heavy-gauge, galvanized-steel cabinet with grille-style sound control top
- Baked-on powder-paint finish
- Wire fan discharge grille
- Steel louver coil guard
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Lifetime Unit Replacement limited warranty
- 10 Year Parts limited warranty
ASPT - Air Handlers and Coils
Product Features
- Internal factory-installed thermal expansion valves for cooling and heat pump applications
- Variable-speed ECM blower motor
- Direct drive, multi-speed ECM blower motor
- All-aluminum evaporator coil
- AHRI certified; ETL listed
- Rigid SmartFrame™ cabinet
- Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
- Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
- Horizontal or vertical configuration capabilities
- 21" depth for easier attic access
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Screw-less sides and back helps to reduce condensation when installed in humid locations
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Glue-less cabinet insulation retention
- Tool-less filter access
- Field Installed 3 kW – 25 kW electric heater kits available
- 10 Year Parts limited warranty
Basic Installation
State and local permits (residential only)
The things we will not include but may require by local code, our technician will give out our advice:
State and local permits (residential only)
- Disconnect, remove, and dispose of the existing equipment.
- We will make a new sheet metal supply transition between new indoor unit and existing main duct trunk up to 20”.
- New 1” filter rack on return duct if it is necessary.
- For 80% AFUE gas furnace, we will install double wall vent pipe from new furnace to main vent pipe up to 15 feet.
- For Attic air handler or furnace with horizontal application, we will install 4 pcs of 6” pump up.
- Install new PVC drain pipe for new indoor unit up to 20 feet.
- Install a new pad for outdoor unit and 6” pump up snow leg.
- Install a new disconnect box for outdoor unit.
- Will have UV wrap for refrigeration tube (big tube).
- Will install refrigeration lock caps.
- Will use nitrogen to purge the system and do pressure test for refrigeration tubes, if find out leak we will provide pricing for repairing or replacing.
- We will start up the new units, cycle and adjust system for best performance.
- Will install a new attic unit drain pan.
- We will register 10 years compressor and parts warranty.
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
CareFree Plan
In addition to our Basic Installation Plan, you also get:
The things we will not include but may require by local code, our technician will give out our advice:
In addition to our Basic Installation Plan, you also get:
- 5 Years of Labor, Lifetime Unit Replacement limited warranty, and 10 Year Parts Warranty limited warranty, if registers within 60 days of installation. (Non-transferable)
- Free Maintenance Membership for 2 Years! ($320.00 Value)
- Free Honeywell WIFI Smart Thermostat ($275.00 Value)
- Free Premium condensate drain automatic safety trap/switch for preventing condensation water leaking problem ($135.00 Value)
- Free industry best HVAC SmartSurge Protection for protecting your ac and heating system from power surges. ($298.00 Value)
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
AHRI# 7989052