Amana 2 Ton 14 Seer AC 80% AFUE Gas Furnace System
SKU:
$4,695.00
$4,695.00 - $5,695.00
per item
This system bundle includes:
- One (1) Amana ASX14 : 2 Ton 14 Nominal Seer R410a Condensing Unit (ASX140241*)
- One (1) Amana AMH80 : 80% AFUE 60k BTU Two Stage Gas Furnace (AMH80604BN)
- One (1) Amana CAPF : Upflow/Downflow A Cased Coil - 17.5" width (CAPF3636B6*)
- One (1) Amana TXV-30: Expansion Valve Kit
ASX14 - Air Conditioners UP TO 15 SEER
Standard Features
AMH8 - Two-Stage Multi-Speed Gas Furnace Up to 80% AFUE
Standard Features
CAPF Series - Air Handlers and Coils
Standard Features
Standard Features
- Energy-efficient scroll compressor
- High-density foam compressor sound blanket
- Single-speed ECM condenser fan motor
- Copeland® ComfortAlert™ diagnostics
- Fully charged for 15’ of tubing length
- Ground lug connection
- Sweat connection service valves with easy access to gauge ports
- Field-installed bi-flow filter drier
- Copper tube & enhanced aluminum fin coil
- AHRI Certified; ETL Listed
- Heavy-gauge, galvanized-steel cabinet with grille-style sound control top
- Baked-on powder-paint finish
- Wire fan discharge grille
- Steel louver coil guard
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- 10 Year Parts limited warranty
AMH8 - Two-Stage Multi-Speed Gas Furnace Up to 80% AFUE
Standard Features
- Energy-efficient multi-speed blower motor
- Two-stage convertible gas valve automatically adjusts to high or low stage
- Heavy-duty stainless-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Durable SureStart™ Silicon Nitride igniter
- Quiet single-speed draft inducer
- Self-diagnostic control board with constant memory fault code
- Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier
- Low continuous fan speed options offer quiet air circulation
- For installation in California’s South Coast Air Quality Management District (SCAQMD) only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.
- Multi-position installation: upflow, horizontal left or right with kit
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak) ≤ 2%
- Heavy-gauge steel cabinet with durable finish
- Fully insulated heat exchanger and blower section
- Lifetime Unit Replacement limited warranty
- Lifetime Heat Exchanger limited warranty
- 10 Year Parts limited warranty
CAPF Series - Air Handlers and Coils
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Check flowrator for cooling and heat pump applications
- Vertical and horizontal models available
- 21" depth for easier attic access • Split seam front for easy access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- UV-resistant drain pan
- AHRI certified; ETL listed
- 10 Year Parts limited warranty
Basic Installation
State and local permits (residential only)
The things we will not include but may require by local code, our technician will give out our advice:
State and local permits (residential only)
- Disconnect, remove, and dispose of the existing equipment.
- We will make a new sheet metal supply transition between new indoor unit and existing main duct trunk up to 20”.
- New 1” filter rack on return duct if it is necessary.
- For 80% AFUE gas furnace, we will install double wall vent pipe from new furnace to main vent pipe up to 15 feet.
- For Attic air handler or furnace with horizontal application, we will install 4 pcs of 6” pump up.
- Install new PVC drain pipe for new indoor unit up to 20 feet.
- Install a new pad for outdoor unit and 6” pump up snow leg.
- Install a new disconnect box for outdoor unit.
- Will have UV wrap for refrigeration tube (big tube).
- Will install refrigeration lock caps.
- Will use nitrogen to purge the system and do pressure test for refrigeration tubes, if find out leak we will provide pricing for repairing or replacing.
- We will start up the new units, cycle and adjust system for best performance.
- Will install a new attic unit drain pan.
- We will register 10 years compressor and parts warranty.
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
CareFree Plan
In addition to our Basic Installation Plan, you also get:
The things we will not include but may require by local code, our technician will give out our advice:
In addition to our Basic Installation Plan, you also get:
- 5 Years of Labor and 10 Year Compressor, 10 Year Parts Warranty, if registers within 30 days of installation.
- Free Maintenance Membership for 2 Years! ($320.00 Value)
- Free Honeywell WIFI Smart Thermostat ($275.00 Value)
- Free Premium condensate drain automatic safety trap/switch for preventing condensation water leaking problem ($135.00 Value)
- Free industry best HVAC SmartSurge Protection for protecting your ac and heating system from power surges. ($298.00 Value)
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
AHRI# 8712077