Amana 2 Ton 18+ Seer Heat Pump Variable Speed Air Handler
SKU:
$8,947.00
$8,947.00 - $10,547.00
per item
This system bundle includes:
- One (1) Amana AVZC18 : 2 Ton 18 Nominal Seer R410a Heat Pump with Inverter Technology (AVZC180241A*)
- One (1) Amana AVPEC : 3 Ton Variable Speed Air Handler (AVPEC37C14A*)
- One (1) Amana HKSC : 15KW Electric Heat Kit (HKSC-15XB)
- One (1) CTK04 : COMMUNICATING THERMOSTAT
- One (1) Wireless Outdoor Sensor
AVZC18 - Heat Pumps
High-Efficiency Heat Pump with Inverter Technology Up to 19 SEER | Up to 10 HSPF
Standard Features
• Variable-speed swing and scroll compressors
• High-density foam compressor sound blanket
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
• Amana control algorithmic logic
• In communicating mode, only two low voltage wires to outdoor unit required
• Diagnostic indicator lights, seven-segment LED display, and fault code storage
• Field-selectable boost mode increases compressor speed during unusually high loads
• Quiet ECM outdoor fan motor
• Fully charged for 15’ of tubing length
• Field-installed bi-flow filter drier
• Coil and ambient temperature sensors
• Suction pressure transducer
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with grille-style sound control top design
• Custom two-tone gray powder-paint finish
• 500-hour salt-spray tested
• Wire fan discharge grille
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
Warranty
AVPEC - Air Handlers and Coils
Multi-Position, Variable-Speed Air Handler
• Electronic Expansion Valve (EEV) for cooling and heat pump applications.
• Variable-speed ECM blower motor
• Suitable for operation with inverter-driven products
• ComfortNet® Communicating System compatible
• Provides constant CFM over a wide range of static pressure conditions independent of duct system
• CFM indicator
• Provides adjustable low CFM for efficient fan-only operation
• All-aluminum evaporator coil
• Fault recall of six most recent faults
• Improved humidity and comfort control
• 3 kW – 25 kW electric heater kits
• AHRI certified; ETL listed
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• Horizontal or vertical configuration capabilities
• 21" depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
Warranty
High-Efficiency Heat Pump with Inverter Technology Up to 19 SEER | Up to 10 HSPF
Standard Features
• Variable-speed swing and scroll compressors
• High-density foam compressor sound blanket
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
• Amana control algorithmic logic
• In communicating mode, only two low voltage wires to outdoor unit required
• Diagnostic indicator lights, seven-segment LED display, and fault code storage
• Field-selectable boost mode increases compressor speed during unusually high loads
• Quiet ECM outdoor fan motor
• Fully charged for 15’ of tubing length
• Field-installed bi-flow filter drier
• Coil and ambient temperature sensors
• Suction pressure transducer
• Sweat connection service valves with easy access to gauge ports
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with grille-style sound control top design
• Custom two-tone gray powder-paint finish
• 500-hour salt-spray tested
• Wire fan discharge grille
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
Warranty
- Lifetime Unit Replacement limited warranty
- 10 Year Parts limited warranty
AVPEC - Air Handlers and Coils
Multi-Position, Variable-Speed Air Handler
• Electronic Expansion Valve (EEV) for cooling and heat pump applications.
• Variable-speed ECM blower motor
• Suitable for operation with inverter-driven products
• ComfortNet® Communicating System compatible
• Provides constant CFM over a wide range of static pressure conditions independent of duct system
• CFM indicator
• Provides adjustable low CFM for efficient fan-only operation
• All-aluminum evaporator coil
• Fault recall of six most recent faults
• Improved humidity and comfort control
• 3 kW – 25 kW electric heater kits
• AHRI certified; ETL listed
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• Horizontal or vertical configuration capabilities
• 21" depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
Warranty
- 10 Year Parts limited warranty
Basic Installation
State and local permits (residential only)
The things we will not include but may require by local code, our technician will give out our advice:
State and local permits (residential only)
- Disconnect, remove, and dispose of the existing equipment.
- We will make a new sheet metal supply transition between new indoor unit and existing main duct trunk up to 20”.
- New 1” filter rack on return duct if it is necessary.
- For 80% AFUE gas furnace, we will install double wall vent pipe from new furnace to main vent pipe up to 15 feet.
- For Attic air handler or furnace with horizontal application, we will install 4 pcs of 6” pump up.
- Install new PVC drain pipe for new indoor unit up to 20 feet.
- Install a new pad for outdoor unit and 6” pump up snow leg.
- Install a new disconnect box for outdoor unit.
- Will have UV wrap for refrigeration tube (big tube).
- Will install refrigeration lock caps.
- Will use nitrogen to purge the system and do pressure test for refrigeration tubes, if find out leak we will provide pricing for repairing or replacing.
- We will start up the new units, cycle and adjust system for best performance.
- Will install a new attic unit drain pan.
- We will register 10 years compressor and parts warranty.
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
CareFree Plan
In addition to our Basic Installation Plan, you also get:
The things we will not include but may require by local code, our technician will give out our advice:
In addition to our Basic Installation Plan, you also get:
- 5 Years of Labor and 10 Year Compressor, 10 Year Parts Warranty, if registers within 30 days of installation.
- Free Maintenance Membership for 2 Years! ($320.00 Value)
- Free Honeywell WIFI Smart Thermostat ($275.00 Value)
- Free Premium condensate drain automatic safety trap/switch for preventing condensation water leaking problem ($135.00 Value)
- Free industry best HVAC SmartSurge Protection for protecting your ac and heating system from power surges. ($298.00 Value)
The things we will not include but may require by local code, our technician will give out our advice:
- For indoor combustion air Grill $125
- Chimney liner up to 35 feet $950
- Crane service fee for rooftop unit.
- Main circuit breaker panel problem, electrician service required by owner's expense.
- Floor drain clogged problem, plumbing service required by owner's expense.
- During our installation process, we may need to cut floor, wall, drywall, door. Owner's permission will be acquired beforehand, but we are not responsible for refinishing, padding, or painting.
AHRI#9114947